As a Holdrege metal roof coating contractor, we coat the metal sections of storefronts, warehouses, and shop additions, pricing each roof section on its own.
Holdrege Buildings
Holdrege metal roof coating jobs often involve a building that grew over time: a front section, a metal warehouse added behind it, and maybe a canopy over the loading area. Each part has its own slope, panel type, and leak history.
We measure and inspect each section separately, so you see what the warehouse roof needs apart from the canopy or the front. That lets you coat the worst section first when the budget calls for it.
Roof Conditions
Buildings with several roof sections leak where those sections meet. These five spots get checked first.
Where a newer metal addition ties into an older roof, the flashing between them carries water from both. That joint is the first place we look.
A gutter between two sections collects runoff from both roofs. When it clogs, water backs up under the panel ends.
The oldest section usually has the most backed-out screws and hardened washers, even when the newer roof behind it is tight.
Metal canopies over loading areas attach to the main wall with flashing that loosens as the canopy moves in wind.
Bottom panel edges on the oldest section often show the deepest rust, because they have stayed wet the longest.
Benefits
Coating lets a Holdrege owner bring every roof section to the same condition without replacing any of them.
Coating ties the old roof and the newer additions together under one continuous layer. The transitions get extra fabric and coating, and every section ends up with the same recoat path.
Pricing each section separately lets you coat the oldest roof this year and the newer addition later.
Retail and service businesses keep their doors open, because the work stays on the roof surface.
A single light-colored coating evens out the heat that different panel colors and ages used to soak up.
Coating Options
Three systems cover most Holdrege roofs. Many buildings use two of them on different sections.
Warehouses and shop additions with exposed screws get the full metal coating system: sealed fasteners, taped laps, primed rust, and finish coats.
Shared gutters and flat transitions between sections hold water, so they get silicone even when the rest of the roof gets another coating.
Pitched shingle fronts in fair condition can be coated to match the work on the metal sections behind them.
Call and tell us which part of the building it is under. Transitions between roof sections are a common source.
Process
On a building with several sections, the steps repeat for each roof, starting with the one that leaks most.
Each section gets its own walk, moisture probe, and fastener count. The transitions between sections get a closer look, since they carry water from both sides.
Square footage, rust, and repair counts are recorded per section, so the price for each part of the building stands on its own.
Panels are washed, screws are tightened or replaced, rust is primed, and the flashing at each transition is refastened.
Laps and section transitions get fabric set in base coat, which is where older and newer roofs move against each other.
Finish coats go on one section at a time at measured thickness, so a business can keep using the rest of the building.
Nearby Towns
Besides Holdrege, we coat commercial metal roofs in Kearney and the towns below. Building somewhere else? Call us or send us a message.
Shops and implement buildings with long exposed-fastener runs.
Roofs coated while the business below keeps its normal hours.
Pre-coat checks and adhesion tests, with extra washing near grain.
Hail walk-throughs, storm repairs, and full recoats in a set order.
Questions
Answers for Holdrege owners with storefronts, warehouses, and additions under one roofline.
The planning range is about $2.50 to $4 per square foot, the same one used in Kearney and every town we serve, and the trip from Kearney leaves the method unchanged. Roof size, rust, fastener and seam repairs, lift access, and the number of coats set where a Holdrege roof lands, and we measure before pricing.
Each section is priced from its own square footage and condition, then the sections are added together. Transitions between roofs take extra fabric and flashing work, and a canopy or gutter that needs silicone adds a second material. Coating the worst section first spreads the cost over two seasons.
Yes. A warehouse or shop addition can be coated by itself, as long as the transition where it meets the front building is sealed as part of the job. That joint carries water from both roofs, so leaving it out would leave the most common leak in place.
Usually they do, though the prep differs. Older panels often need more rust treatment and new screws, while a newer addition needs cleaning and the primer the coating maker lists for factory paint. Both then take the same finish coats, which gives the building one recoat schedule.
We take metal roof coating jobs in Holdrege and run them from Kearney, with the same inspection and coating steps used on every roof. Call us or start with a ballpark estimate online, and a roof walk gets scheduled once we know the size of the building.
Canopies can go in the same job. Metal canopies get the same fastener, lap, and rust work as the main roof, plus extra attention where the canopy flashing meets the wall. Coating it in the same job keeps one recoat schedule for the whole property.
Next Step
Start with a ballpark estimate for the building, or call to talk through which section leaks first.